←Ethernet Switch
Datasheet
Product WebsiteCM-4012F0-AER-TS00CPBA2
| manufacturer | OnTime Networks |
| series | CM-4012F0-AER |
| port count | 12 |
| port speed | 10/100/1000 |
| connector type | Mighty Mouse 37 pins |
| height (in) | 1.770 |
| width (in) | 5.870 |
| depth (in) | 3.740 |
| weight (lbs) | 2.050 |
| power (W) | 12 |
| operating temperature (°C) | -40°C - +71°C |
| input voltage (V) | 22V - 32V DC (28V) |
| form factor | Non Standard (Enclosed) |
| management | Managed L2 |
| production status | Active |
| country of origin | - |
Detailed Specifications
| Overview: The CM-4012F0 AER Series is a line of ruggedized managed gigabit Ethernet switches from OnTime Networks, specifically engineered to operate reliably in the harsh climates and electrically noisy environments of military aircraft. These flight-rated switches are designed and tested to withstand extreme shock and vibration, wide temperature and humidity ranges, dust and water exposure, noisy EMI, and dirty power. The CM-4012F0 AER is qualified for temperatures of -55°C to +85°C, altitudes up to 85,000 ft, and provides 250ms hold-over capability where configured. It is intended for airborne platforms requiring a compact, rugged, managed switching solution with PTP time synchronization and advanced network management. Key Specifications: - Port configuration: 12 × 10/100/1000Base-T Ethernet ports via 3× Mighty Mouse 37-pin connectors - Power input: 28VDC nominal (22–32VDC operating range) - Power consumption: 12 W typical - Power connector: 10-pin MMP (2M 801-011-07ZNU7-10PA), screw type - Connector spacing: According to MIL-STD-1472F - MAC table: 8192 MAC addresses - Priority queues: 8 - Switch fabric: Store-and-forward, full wire speed on all ports - Operating temperature: -40°C to +71°C (per MIL-STD-810G 501.5, 502.5, 503.5) - Storage temperature: -40°C to +85°C (per MIL-STD-810G 502.5) - Altitude: 85,000 ft (per MIL-STD-810G 500.5) - Enclosure: Aluminum case - Dimensions: 149 mm (W) × 95 mm (D) × 45 mm (H) / 5.86 in (W) × 3.74 in (D) × 1.78 in (H) - Weight: 930 g / 2.05 lbs - Surface finish: Powder paint on top of SurTec 650 - Power protection: Overload current protection and reverse polarity protection - Hold-up: No power hold-up (standard); 250ms hold-up available as an option - Data Zeroization: Erases non-volatile flash memory and restores board to factory default configuration; available via HTTP and CLI Qualifications/Compliance Standards: - MIL-STD-461F: CE102, Conducted Emission, 10 kHz – 10 MHz, power leads - MIL-STD-461F/G: CS101, Conducted Susceptibility, power leads; CS114, Bulk Cable Injection, 10 kHz – 200 MHz; CS115, Bulk Cable Injection, 10 kHz – 200 MHz; CS116, Damped Sinusoidal Transients, Cables and Power Leads, 10 kHz – 100 MHz; CS118, Personnel Borne Electrostatic Discharge (ESD) - MIL-STD-461F: RE101, Radiated Emission, Magnetic Field, 30 Hz – 100 kHz, Army; RE102, Radiated Emission, Electric Field - MIL-STD-461F: RS103, Radiated Susceptibility, 2 MHz – 40 MHz, 200 V/m - Power input: MIL-STD-1275E - Operational temperature: MIL-STD-810G 501.5, 502.5, 503.5, -40°C to +71°C - Storage temperature: MIL-STD-810G 502.5, -40°C to +85°C - Altitude: MIL-STD-810G 500.5, 85,000 ft - Operational vibration: MIL-STD-810G 514.6, procedure I (up to 10g) - Shock: MIL-STD-810G 516.6, procedure V (40g, 11ms); 516.4, procedure 1 (30g, 11ms) - Acceleration loads: MIL-STD-810G Method 513.6 (operational: 24g, ultimate load: 35.9g) - Connector spacing: MIL-STD-1472F - Approved for military environmental and EMC requirements Management Protocols: - Network management: HTTP/HTTPS, telnet/SSH, CLI, and SNMP v1/v2/v3 - Event notification: Syslog and SNMP trap - Built-in test: Built-in test procedure performed at boot time; continuous BIT procedure when device is powered - Data zeroization via HTTP and CLI Industrial Protocol Support: - IEEE 802.3x for Flow control - IEEE 802.3ad for LACP (Link Aggregation Control Protocol) - IEEE 802.1D for STP (Spanning Tree Protocol) - IEEE 802.1p for COS (Class of Service) - IEEE 802.1Q for VLAN Tagging - IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol) - IEEE 802.1s for MSTP (Multiple Spanning Tree Protocol) - IEEE 802.1X for Authentication - IEEE 802.1AB for LLDP (Link Layer Discovery Protocol) - IEEE 1588 (PTPv1 and PTPv2) with PTP version translation (v1/v2) support, Transparent Clock (TC) - IGMP snooping (up to 1024 multicast filters) or static multicast filter setting - DHCP - TOS/Diffserv supported - Quality of Service (802.1Q) for real-time traffic - VLAN (802.1Q) with VLAN tagging and MVR - Port rate limiting - Port configuration, status, statistics, monitoring, security Switching Capacity: - Store-and-forward switching with full wire speed on all ports - 8192 MAC address table - 8 priority queues - Up to 1024 multicast filters via IGMP snooping or static configuration Software & Management: - Security features: Enable/disable ports, MAC-based port security; port-based network access control (802.1x); VLAN (802.1Q) to segregate and secure network traffic; RADIUS centralized password management; SNMPv3 encrypted authentication and access security - Management interfaces: HTTP/HTTPS, telnet/SSH, CLI, SNMP v1/v2/v3 - Event notification: Syslog and SNMP trap - Port mirroring - Enhanced watchdog features - Built-in test: boot-time BIT and continuous BIT when powered - Data zeroization: erase non-volatile flash memory and restore factory default configuration via HTTP and CLI - NTP server Product Series Comparison: - CM-4012F0-AER-TS00CPBA0: 149×95×45 mm form factor with LEDs; no power hold-up - CM-4012F0-AER-TS00CFBA0: 149×95×45 mm form factor; no power hold-up - CM-4012F0-AER-TS00CPBA2: 149×95×45 mm form factor with LEDs; includes 250ms power hold-up - CM-4012F0-AER-TS00CFBA2: 149×95×45 mm form factor; includes 250ms power hold-up All variants share the same 12-port 10/100/1000Base-T configuration, 28VDC power input, environmental qualifications, and management features. |
IronWire is not affiliated with the listed manufacturer and does not guarantee the accuracy of the information shown here. We strive to provide the most accurate information possible. Please contact us if any shown information is incorrect. Consult the original equipment manufacturer (OEM) before making a purchase.