←Ethernet Switch
Datasheet
Product WebsiteCM-4012F0-AER-TS00CFBA0
| manufacturer | OnTime Networks |
| series | CM-4012F0-AER |
| port count | 12 |
| port speed | 10/100/1000 |
| connector type | Mighty Mouse 37 pins |
| height (in) | 1.780 |
| width (in) | 5.860 |
| depth (in) | 3.740 |
| weight (lbs) | 2.050 |
| power (W) | 12 |
| operating temperature (°C) | -40°C - +71°C |
| input voltage (V) | 22V - 32V DC (28V) |
| form factor | Non Standard (Enclosed) |
| management | Managed |
| production status | Active |
| country of origin | - |
Detailed Specifications
| Overview Product Overview: The CM-4012F0 AER Series is a ruggedized managed gigabit Ethernet switch designed by OnTime Networks for use in military aircraft and other harsh environments. It provides 12×10/100/1000Base-T Ethernet ports via 3 Mighty Mouse 37-pin connectors, featuring a compact aluminum enclosure that is qualified for extreme conditions. The switch supports advanced networking features such as PTP 1588 Transparent Clock (TC) with version translation (v1/v2), NTP server, and network redundancy via MSTP/RSTP/STP. It is built to withstand shock, vibration, wide temperature ranges, humidity, dust, water exposure, EMI, and dirty power, making it suitable for demanding aerospace applications. Key Specifications - Ports: 12×10/100/1000Base-T via 3 Mighty Mouse 37-pin connectors. - Form Factor: 149mm (W) x 95mm (D) x 45mm (H) / 5.86in (W) x 3.74in (D) x 1.78in (H). - Weight: 930g / 2.05lbs. - Power Input: 28VDC (22-32VDC) with overload current and reverse polarity protection. - Power Consumption: 12W typical. - Power Hold-Up: Optional 250ms hold-over capability (model dependent). - Operating Temperature: -40°C to +71°C (MIL-STD-810G). - Storage Temperature: -40°C to +85°C (MIL-STD-810G). - Altitude: 85,000ft (MIL-STD-810G). - Enclosure: Aluminum case with powder paint finish over SurTec 650. - Connector Spacing: According to MIL-STD-1472F. - MAC Table: 8192 MAC addresses. - Priority Queues: 8. - Data Zeroization: Available via HTTP and CLI to erase flash memory and restore factory defaults. Qualifications/Compliance Standards The switch is approved for military environmental and EMC requirements. It meets the following standards: - Conducted Emission: MIL-STD-461F CE102, 10kHz-10MHz, power leads. - Conducted Susceptibility: MIL-STD-461F/G CS101 (power leads), CS114 (bulk cable injection, 10kHz-200MHz), CS115 (bulk cable injection), CS116 (damped sinusoidal transients, 10kHz-100MHz), and CS118 (personnel borne ESD). - Radiated Emission: MIL-STD-461F RE101 (magnetic field) and RE102 (electric field). - Radiated Susceptibility: MIL-STD-461F RS103, 2MHz-40MHz, 200V/m. - Power Input: MIL-STD-1275E. - Temperature and Altitude: MIL-STD-810G methods 501.5, 502.5, 503.5, and 500.5. - Operational Vibration: MIL-STD-810G 514.6, procedure I (up to 10g). - Shock: MIL-STD-810G 516.6, procedure V (40g, 11ms) and 516.4, procedure 1 (30g, 11ms). - Acceleration Loads: MIL-STD-810G 513.6 (operational: 24g, ultimate load: 35.9g). Management Protocols - Network Management: HTTP/HTTPS, telnet/SSH, CLI, and SNMP v1/v2/v3. - Event Notification: Syslog and SNMP trap. - Built-in Test: Procedure performed at boot; continuous BIT while powered. - Access Control: IEEE 802.1X port-based network access control, RADIUS centralized password management, MAC-based port security, and enable/disable ports. - SNMPv3 encrypted authentication and access security. Industrial Protocol Support - IEEE 802.3x Flow Control. - IEEE 802.3ad LACP. - IEEE 802.1D STP, 802.1w RSTP, 802.1s MSTP. - IEEE 802.1p CoS. - IEEE 802.1Q VLAN tagging and MVR. - IEEE 802.1X Authentication. - IEEE 802.1AB LLDP. - IEEE 1588 PTPv1 and PTPv2 (Transparent Clock with version translation). - IGMP snooping (up to 1024 multicast filters) and static multicast filter setting. - Port rate limiting. - DHCP. - TOS/Diffserv supported. - Quality of Service (QoS) for real-time traffic. Switching Capacity - Switching Fabric: Store-and-forward with full wire speed on all ports. - MAC Addresses: 8192. - Priority Queues: 8. Software & Management The switch offers a comprehensive management suite including web interface (HTTP/HTTPS), command-line interface (via telnet/SSH), and SNMP. Additional features include port mirroring, VLAN configuration, port statistics/status/monitoring, and data zeroization for secure erasure of non-volatile flash memory. It also supports DHCP and enhanced watchdog features for reliable operation. |
IronWire is not affiliated with the listed manufacturer and does not guarantee the accuracy of the information shown here. We strive to provide the most accurate information possible. Please contact us if any shown information is incorrect. Consult the original equipment manufacturer (OEM) before making a purchase.