ESW1124

manufacturer	MilDef
series	19"/2 ESW1100
port count	10
port speed	1Gbps
connector type	RJ45/Fiber
height (in)	1.740
width (in)	8.660
depth (in)	9.000
weight (lbs)	6.700
power (W)	54
operating temperature (°C)	-40°C - +65°C
input voltage (V)	10V - 32V DC
form factor	Non Standard (Enclosed)
management	Unmanaged
production status	Active
country of origin	Sweden

Detailed Specifications

The MilDef ESW1124 is a rugged, passively cooled, unmanaged Gigabit Ethernet switch built to MilDef's 19inch/2 small form factor standard. It provides 8 x 1000BASE-T copper PoE ports and 2 x 1000BASE-SX fiber ports in a 1U chassis measuring 220 x 44 x 228 mm. The ESW1124 is a member of the ESW1100 Series and is designed from the ground up for defence applications. It requires no configuration before use -- simply plug in cables and data streams immediately. The unit is built on a Vitesse switch architecture and conforms to IEEE 802.3u. Power over Ethernet is supported on all 8 copper ports per IEEE 802.3af (Mode A). Power input is MIL-STD-1275D compliant. MilDef products are operationally proven and deployed in military operations in over 60 countries. Spare parts are stocked and units serviced for 5 years after end-of-life. Manufacturer: MilDef Group AB Muskotgatan 6 S-254 66 Helsingborg, Sweden Tel: +46 42 25 00 00 infomildef@mildef.com www.mildef.com Model: ESW1124 Issue: 03 (2020-06-17) Form Factor: 19inch/2 (MilDef proprietary small form factor) Switch Type: Unmanaged Switch Architecture: Vitesse PORT CONFIGURATION ------------------ Total Ports: 10 Copper PoE Ports: 8 x 1000BASE-T with PoE (ETH 1 - ETH 8, front panel) Fiber Ports: 2 x 1000BASE-SX (ETH 9 - ETH 10, front panel) PoE Standard: IEEE 802.3af, Mode A Connector Type: Rugged MIL connectors (all Ethernet ports) Power Input Connector: DC IN (front panel, 1 x power) Service Connector: RS-232 (back panel) PoE POWER BUDGET ---------------- Max PoE power: 110W total (PoE budget across 8 ports) Input 19-32 VDC: 110W PoE budget Input 10-18 VDC: Reduced PoE budget (contact MilDef) Per-port PoE max: IEEE 802.3af Class max = 15.4W per port PHYSICAL SPECIFICATIONS ----------------------- Form Factor: 19inch/2 (MilDef standard) 1U height Dimensions (W x H x D): 220 mm x 44 mm x 228 mm (8.66 in. x 1.74 in. x 9.0 in.) Weight: 3.0 kg (6.7 lbs) Chassis Material: Aluminum Surface Treatment: Chromit-Al Coating / Color: DuPont AE0305-6603120 (RAL 6031) (military olive/green) Earth Point: M6 x 12mm Noise Level: Maximum 40 dB SPL A-weighting at 1m (3.3 ft) distance Cooling: Passive (fanless; no moving parts) Mounting: 19inch/2 standard mounting (19-inch rack, half rack, surface mount at any angle per 19inch/2 standard) POWER ----- Input Voltage (no PoE): 10V to 32V DC Input Voltage (PoE): 19V to 32V DC (full 110W PoE budget) 10V to 18V DC (reduced PoE budget) Power Standard: MIL-STD-1275D Sections 5.3.2.2, 5.3.2.3, 5.3.2.4 Polarity Protection: Protected against polarization failure across full normal operating voltage range Power Consumption: No PoE - Idle: 9W No PoE - Typical: 11W No PoE - Maximum: 13W With PoE - Typical: 54W With PoE - Maximum: 143W (system + full PoE load) RELIABILITY ----------- MTBF: Greater than 205,583 hours ENVIRONMENTAL SPECIFICATIONS ----------------------------- Operating Temperature: -40C to +65C (-40F to +149F) Optional: -40C to +71C (MIL-STD-810G Method 501.5 Proc. II) Storage Temperature: -40C to +71C (-40F to +160F) (MIL-STD-810G Method 501.5 Proc. I) Humidity: 95 +/-4% RH Ten 24-hour cycles (MIL-STD-810G Method 507.5 Proc. II - Aggravated) Ingress Protection: IP6X (dust-tight) IPX5 (water jet resistant) Combined effective rating: IP65 Fungus: MIL-STD-810G Method 508.6 90-day fungus resistance test SHOCK ----- Standard: MIL-STD-810G, Method 516.6, Procedure I - Functional Shock Peak Acceleration: 40g Pulse Duration: 11 ms Waveform: Terminal peak sawtooth Environment: Ground equipment, Table 516.6-II Transit Drop: MIL-STD-810G, Method 516.6, Procedure IV - Transit Drop Table 516.6-VI (manpacked/man-portable) Units < 45.4 kg / drop height < 91 cm VIBRATION --------- All per MIL-STD-810G, Method 514.6: Wheeled Vehicle: Procedure I - General Vibration Category 20 - Ground mobile, wheeled Tracked Vehicle: Procedure I - General Vibration Category 20 - Ground mobile, tracked Helicopter: Procedure I - General Vibration Category 14 - Rotary wing aircraft Loose Cargo: Procedure II - Loose cargo transport Category 5 - Truck/trailer loose cargo ALTITUDE -------- Operating: Up to 4,572 m (15,000 ft) (MIL-STD-810G Method 500.5 Proc. II) Rapid Decompression: From 2,438 m (8,000 ft) / 75.2 kPa to 12,192 m (40,000 ft) / 17 kPa (MIL-STD-810G Method 500.5 Proc. III) TEMPERATURE SHOCK ----------------- Standard: MIL-STD-810G, Method 503.5, Procedure I-C - Multi-Cycle Shocks High Extreme: +71C (+160F) Low Extreme: -40C (-40F) SALT FOG -------- Standard: MIL-STD-810G, Method 509.5 Concentration: 5% +/-1% by weight Duration: Two cycles (24h wet + 24h dry per cycle) EMC / EMI COMPLIANCE --------------------- CE EMC: EMC Directive 2014/30/EU MIL-STD-461F: CE102 (Conducted Emissions): Basic Curve; 10 kHz to 10 MHz RE102 (Radiated Emissions): Navy Mobile and Army; 2 MHz to 18 GHz CS114 (Conducted Susceptibility): Army, Ground; 10 kHz to 200 MHz CS115 (Conducted Susceptibility): Bulk cable injection, impulse excitation CS116 (Conducted Susceptibility): 10 kHz to 100 MHz RS103 (Radiated Susceptibility): Army; 2 MHz to 1 GHz ESD: EN 61000-4-2:2009 Level 3 EN 50024:1998 Performance Criteria B + A1:2001 + A2:2003 ESW1100 SERIES MODEL COMPARISON --------------------------------- Model Copper Ports Fiber Ports PoE ESW1101 8x 100BASE-T None None ESW1102 8x 100BASE-T None None (updated) ESW1121 8x 1000BASE-T None None ESW1122 8x 1000BASE-T None Yes (802.3af) ESW1123 8x 1000BASE-T 2x 1000SX None ESW1124 8x 1000BASE-T 2x 1000SX Yes (802.3af) <-- This unit ESW1127 (contact MilDef for specifications) All ESW1100 series models share the same 19inch/2 form factor, passive cooling, and MIL-STD compliance profile. SUPPORT AND LIFECYCLE --------------------- Support: Lifetime support program Spare Parts: Stocked and available for 5 years after product end-of-life Customization: All MilDef products are highly customizable (connectors, specs, etc.) Contact MilDef for custom requirements Deployed: Operationally proven in 60+ countries TYPICAL USE CASES ----------------- - Military ground and armored vehicles (vetronics) - Command posts and tactical operations centers - Airborne and helicopter platforms - Naval / shipborne applications - Applications requiring PoE to IP cameras, sensors, radios, or access points with fiber uplinks - 19inch/2 rack-integrated military network infrastructure - Any SWaP-optimized defence network requiring PoE + fiber

IronWire is not affiliated with the listed manufacturer and does not guarantee the accuracy of the information shown here. We strive to provide the most accurate information possible. Please contact us if any shown information is incorrect. Consult the original equipment manufacturer (OEM) before making a purchase.