←Ethernet Switch
Datasheet
Product Website
SABRENET-24000
| manufacturer | Diamond Systems |
| port count | 28 |
| port speed | 1G/10G |
| connector type | RJ45/SFP+ |
| operating temperature (°C) | -40°C - +85°C |
| input voltage (V) | 7V - 40V DC |
| form factor | Compact |
| management | Managed L2/L3 |
| production status | Active |
| country of origin | USA |
Detailed Specifications
| The SabreNet-24000 is a rugged, managed Ethernet switch designed for vehicle-mounted and other harsh-environment deployments requiring reliable network connectivity under extreme operating conditions. It is intended for industrial, defense, and military applications. The unit is built around Diamond Systems' EPS-24G4X board-level switch, which is itself based on the EPSM-10GX4 switch module. The SabreNet- 24000 runs Vitesse/Microsemi Istax Layer 3 routing/switching embedded software and is packaged in a sealed, rugged enclosure with military- grade connectors. Manufacturer: Diamond Systems Corporation Sunnyvale, California USA +1-650-810-2500 www.diamondsystems.com PORT CONFIGURATION ------------------ Total Ports: 28 1G Copper Ports: 24 x 10/100/1000BASE-T (non-blocking, wire-speed) 10G Uplink Ports: 4 x SFP+ sockets (1/2.5/5/10Gbps SFI) Standard Configuration: The 4 x 10G ports are implemented with copper via M12 X-coding connectors. Fiber Option: SFP+ copper/RJ-45 modules can be replaced with customer- specified fiber modules (LC connections). In the fiber configuration, the I/O connectors are D38999 size C shells with 4 fiber termini (2 ports) per shell. CORE SWITCH HARDWARE (EPS-24G4X / EPSM-10GX4 Based) ----------------------------------------------------- Architecture: 2-board solution EPSM-10GX4 switch module provides core switch function and 12 PHYs; additional 12 PHYs and remaining circuitry on carrier board On-board Packet Memory: 4 MB DRAM: 2 GB Flash: 1.5 GB PCB Thickness: 50% thicker than commercial-grade PCBs (enhanced vibration resistance) PHYSICAL SPECIFICATIONS (EPS-24G4X Board Level) ------------------------------------------------- Board Dimensions: 107 x 156 mm (4.213 x 6.142 in) Board Weight: 389 g (13.7 oz) Mounting/Cooling: Convection cooling via heat sinks (standard) Conduction cooling via heat spreader / mounting plate (HSP model option) Note: The SabreNet-24000 packages the EPS-24G4X in a sealed rugged enclosure. Enclosure-level dimensions and weight should be confirmed with Diamond Systems directly, as they vary by configuration. POWER ----- Input Voltage Range: 7 - 40 VDC (wide-range DC input) Built-in transient protection Power Filter: MIL-STD-461-D compliant power filter module included (standard configuration) Power Consumption (EPS-24G4X at Vin = 24VDC): - All ports idle: 13W - All 24 x 1G ports active: 20W - All 24 x 1G + 4 x 10G active: 26W (Does not include PoE; this switch does not provide PoE output) Power Management: ActiPHY and PerfectReach features reduce power consumption for shorter cable lengths and shut down power to disconnected ports ENVIRONMENTAL SPECIFICATIONS ----------------------------- Operating Temperature: -40C to +80C (-40F to +176F) (EPS-24G4X rated; SabreNet enclosure rated -40C to +85C per design target) Shock/Vibration: MIL-STD-202G tested and compliant EMI/EMC: MIL-STD-461-D (via integrated power filter) Connector Type: Latching military-grade I/O connectors (copper config: M12 X-coding) (fiber config: D38999 size C shells) RoHS Compliant: Yes I/O AND MANAGEMENT ------------------ Serial Management Port: 1 x RS-232, 38400/N/8/1 Available for out-of-band CLI management Web Interface: GUI accessible over any Ethernet port (customer branding/logo customization available) Network Management: SNMP v1/v2c/v3 Port Indicators: LEDs for each port (link status and speed) Removable Storage: SD card (optional) SOFTWARE - LAYER 2+ SWITCHING FEATURES --------------------------------------- - Non-blocking wire-speed performance on all ports - Jumbo frame support at all speeds - 8K MAC addresses - 4K VLANs (IEEE 802.1Q) - 8K IPv4 and IPv6 multicast group support - Flexible link aggregation (IEEE 802.3ad), Layer 2 - Layer 4 hashing - Rapid Spanning Tree Protocol (RSTP) and MSTP - IEEE 802.1d, 802.1w, 802.1s, 802.1X - Multicast and broadcast storm control, flooding control - 8 priority queues per port with QoS scheduling - VLAN support - SNMP v1/v2c/v3 SOFTWARE - LAYER 3 ROUTING FEATURES (optional upgrade) -------------------------------------------------------- - Hardware- and software-based IPv6 L3 static routing - RFC 2328 OSPFv2 dynamic routing - RADIUS accounting - Port and queue policers - IEEE 1588 Precision Time Protocol (PTP) -- requires optional precision clock circuit modification AVAILABLE SOFTWARE/MODEL CONFIGURATIONS ----------------------------------------- - Layer 2+ switching software (default) - Layer 3 routing/switching software (upgrade) - Layer 3 + IEEE-1588 PTP clock circuit and software support (upgrade) - HSP (heat spreader) variants for conduction-cooled installations TYPICAL USE CASES ----------------- - Military ground vehicles and tactical platforms - Unmanned aerial vehicles (UAVs) and unmanned ground vehicles (UGVs) - Airborne and shipborne applications - Industrial vehicle networking - Harsh outdoor infrastructure requiring MIL-grade connectivity - Applications requiring MIL-STD-461 EMI compliance COMPLIANCE / CERTIFICATIONS ---------------------------- - MIL-STD-202G (Shock and Vibration) - MIL-STD-461-D (EMI/EMC via power filter module) - RoHS compliant |
IronWire is not affiliated with the listed manufacturer and does not guarantee the accuracy of the information shown here. We strive to provide the most accurate information possible. Please contact us if any shown information is incorrect. Consult the original equipment manufacturer (OEM) before making a purchase.