←Ethernet Switch
SabreNet-12000-220
| manufacturer | Diamond Systems |
| series | SabreNet |
| port count | 12 |
| port speed | 10/100/1000 |
| connector type | MIL-DTL-38999 |
| height (in) | 3.340 |
| width (in) | 6.400 |
| depth (in) | 5.400 |
| weight (lbs) | 3.054 |
| power (W) | 10.44 |
| operating temperature (°C) | -40°C - +85°C |
| input voltage (V) | 9V - 60V DC (24V) |
| form factor | Non Standard (Enclosed) |
| management | Managed L3 |
| features |
|
| qualifications |
|
| production status | Active |
| country of origin | - |
Detailed Specifications
| Overview: SabreNet-12000 is a compact, rugged 12-port managed Gigabit Ethernet switch designed for vehicle and other harsh-environment deployments. It provides 12 ports of 10/100/1000Base-T copper Ethernet in a sealed IP67 enclosure, built around Diamond Systems' EPS-12000-CM board-level switch (itself combining an EPSM-10GX switch module with a 12-port carrier board in a dual-board module + carrier design). The embedded iStax Layer 2+ / Layer 3 routing and switching software delivers full switch functionality with no software development required, and the unit can be managed either in-band through an embedded web interface reachable on any port or out-of-band through a local RS-232 command line interface (CLI). Designed for rugged operation, the switch is housed in a low-height enclosure with a MIL-STD-461 filter or a taller enclosure with an integrated MIL-grade isolated power supply, depending on model, and is qualified for -40°C to +85°C ambient operation with shock and vibration testing to MIL-STD-810G. It is intended for military, vehicle, and other harsh-environment networking where a small, sealed, connectorized managed switch is required. Key Specifications: - 12 x 10/100/1000Base-T copper Ethernet ports (4 twisted-pair per port), arranged as groups of 4 and 8 on two MIL-DTL-38999 connectors. - Switch silicon: Vitesse VSC7444 Ethernet switch with built-in 500 MHz MIPS CPU, paired with a Vitesse VSC8522 12-port Gigabit PHY. - Dimensions: 6.40" W x 5.40" D x 3.34" H (163 x 137 x 85 mm). - Weight: 3.0545 lb (1.3854 kg). - Input power: 9–60 VDC (nominal 24 VDC). - Typical power consumption at 12 V: 6.6 W with no ports connected (0.55 A), 7.2 W with a single port connected (0.6 A), 10.44 W with all 12 ports connected from the module's 8522 PHY (0.87 A). - Operating temperature: -40°C to +85°C ambient. - Enclosure: rugged IP67 design; low-profile case on 1xx models, high-profile case on 2xx models. - Connectors: three MIL-DTL-38999 series III connectors with olive drab cadmium finish, wall-mount type installed from inside the box with sealing gaskets and nut plates — J1 for power, J2 for ports 1–4 plus serial and PPS, J3 for ports 5–12. - J1 power connector: MIL D38999/20JB4PN (shell size B/11, insert style 4, 4 size 20 pins); pinout A and B = Vin (+7–34 V), C and D = GND. Mating connector: MIL D38999/26FB4SN or equivalent. - J2 I/O connector: MIL D38999/20WE35SN (shell size D/15, insert style 35, 55 size 22 sockets), carrying Ports 1–4 bi-directional pairs, digital ground, RS-232 TXD/RXD, and PPS clock input/output. Mating connector: MIL D38999/26FD35PN or equivalent. - Internal latching power and I/O connectors. - Programmable flash on board preprogrammed with iStax layer 2+ management software; flash holds dual application images plus boot code, with NOR flash for configuration parameters. - Available lab bench-grade external cable kit for product evaluation. Qualifications/Compliance Standards: - MIL-STD-810G shock and vibration tested and passed (test report available). - MIL-STD-202G tested and passed. - MIL-STD-461 power filter integrated on 1xx models. - 2xx models add an integrated MIL-grade isolated power supply based on Diamond's JMM-7500, providing compliance to MIL-STD-461, MIL-STD-704, and MIL-STD-1275, with 500 V input-to-output isolation. - IP67 enclosure design. Management Protocols: - Managed via embedded web interface accessible on any Ethernet port (in-band) or RS-232 CLI on the 4-port connector (out-of-band). - CLI command groups include IP, MAC, VLAN/PVLAN, dot1x port-based network access control, LACP, LLDP, access management, access-list, logging, spanning-tree, Green-Ethernet, thermal-protect, QoS, privilege, SNMP, SNTP, RADIUS server, banner, terminal, reload, firmware, ping, debug, security, monitor, and PoE commands, plus board version commands. - Web interface supports IP configuration, port configuration, password change, VLAN setup, SNMP configuration, mirroring, QoS setup, web interface activation/deactivation, firmware upgrade, saving startup configuration, and factory defaults. - SNMP management and SNTP time synchronization supported. - Optional IEEE 1588 / PTP feature available on -120 and -220 models. Industrial Protocol Support: - IEEE 1588 / PTP support on models equipped with the optional PTP feature. - PPS clock input and output signals available on the J2 connector. - Layer 3 routing / switching software included for routed industrial networks. - Layer 2 features include VLAN/PVLAN, QoS, RSTP/MSTP spanning tree, link aggregation (LACP), LLDP, and dot1x port-based network access control. Switching Capacity: - 12 switched 10/100/1000 Mbps copper ports, full Gigabit per port. - Vitesse VSC7444 switch fabric with integrated 500 MHz MIPS management CPU. - Vitesse VSC8522 12-port Gigabit PHY supplies all 12 copper ports. Software & Management: - Embedded iStax Layer 2+ management software and Layer 3 routing/switching software included; no software development required. - Web interface (in-band) and CLI over RS-232 (out-of-band) for configuration and monitoring. - Dual application images plus boot code stored in flash, with NOR flash for configuration parameters. - Firmware upgrade, save startup configuration, and factory default restore supported through both CLI and web interface. - Customizable, including software branding and connector arrangement. Product Series Comparison: - SabreNet-12000-100: 12-port gigabit managed switch with Layer 3 routing/switching software, MIL-STD-461 power filter, and low-profile case; input voltage range 7–34 VDC; features include VLAN, QoS, RSTP/MSTP, link aggregation, and SNMP; housed in the short enclosure. - SabreNet-12000-120: same as -100 (Layer 3 routing/switching software, 461 filter, low-profile case, 7–34 VDC input) but adds IEEE-1588 / PTP support. - SabreNet-12000-200: 12-port gigabit managed switch with Layer 3 routing/switching software, MIL-grade isolated power supply (based on the JMM-7500) and high-profile case; input voltage range 9–60 VDC (24 VDC nominal); features include VLAN, QoS, RSTP/MSTP, link aggregation, and SNMP; housed in the taller enclosure. - SabreNet-12000-220: same as -200 (Layer 3 routing/switching software, MIL-grade power supply, high-profile case, 9–60 VDC input) but adds IEEE-1588 / PTP support. |
IronWire is not affiliated with the listed manufacturer and does not guarantee the accuracy of the information shown here. We strive to provide the most accurate information possible. Please contact us if any shown information is incorrect. Consult the original equipment manufacturer (OEM) before making a purchase.